Viewers shipped by truck are shipped complete. Those shipped by air require
the following assembly. The main tube with attached helmet and viewing head
is complete as shipped to you. You now have to assemble the base with the
standing ring and attach it to the main tube.
Note: Use caution when handling heavy items. It is strongly suggested that
two people perform the task of assembling this viewer.
- Unpack the base, standing ring and ring supports. Remove the three bolts
from the bottom of the base that holds the aluminium standing ring in place
for shipping. Keep bolts, flat washers, and lock washers for later use.
- Remove the four aluminium standing ring supports from the crate, apply
light grease to each threaded end (the grease is to make disassembly easy
if ever required) and thread those studded ends into the aluminum standing
ring.
- (If weighted base) Remove the four steel base weights from the crate. Locate
the four bolts, four flat washers, and four lock washers found in the hardware
bag. Use these bolts (each with a flat washer and a lock washer) to fasten
(the weights) loosely through the bottom of the base and into aluminium stand-offs
as shown in the weight installation diagram. Note:
each bolt is to go up from bottom (through a weight) and then through hole
in base and then into bottom of a standing ring support - four bolts
(four weights) - four ring supports.
- Finish tightening the four bottom bolts (holding the weights) in place.
- Use the three bolts, flat washers, and lock washers from step #1 above
to bolt main viewer tube to the base.
- Lift viewer to its upright position.
- Open coin door (on coin machine) and ensure battery is well connected
and coin bag is in place. Remove any/all wrenches and keys from the coin
bag. On non-coin machines a head wrench (hex keys) and head lock are taped to helmet
arms and should be removed. Then close door and insert door lock into door
opening and keep the keys in a secure place.
Click
here to view or print a detailed assembly diagram.
You will need Adobe's Acrobat Reader to view these instructions. If you do
not already have this useful product you can get it here: get
Acrobat.
